Product Description

Bosch Rexroth is the manufacturer of the 2AD104C-B35OB4-CS06-E2N1 servo motor. With flange and foot mounting options available, the servo motor is built for versatile installation. In industrial equipment, this enables stable attachment in several configurations. To further add to its flexibility, it uses conventional bearings, which are appropriate for applications with low to medium radial and axial stresses. With a maximum speed of 1600 rpm and a rated torque of 30 Nm, this servo motor can generate 8.0 kW of rated power. It guarantees dependable performance in all operational modes because of its constant running current of 20.5 A, even in standstill situations. Up to this speed, the motor maintains a constant torque; after that, the power stays constant, as shown by its derating speed of 1600 rpm.

Additionally, heat control and electrical safety are given top priority in the motor's design. For the power connection to have sufficient current carrying capability, the cross-section must be at least 2.5 mm^2. The motor balances responsiveness and stability with a mass of 55 kg and a moment of inertia of 0.027 kgm^2. When using certain drive controllers and feedback settings, the maximum speed of 9000 rpm may only be attained, which is 3500 rpm. The device is suitable for a variety of settings, as shown by other specs.

This module has a noise level of 70 dB(A) and can endure temperatures between 0 and 40 degrees Celsius in the operating environment. The electrical safety is guaranteed by the insulation class F, while the motor and blower are protected against dust and water infiltration by the IP65 and IP24 protection classes, respectively. Even under extreme circumstances, the motor's performance is maintained thanks to the inbuilt radial fan, which runs at 230 V or 115 V and uses 60 VA of electricity to cool it. Following your purchase from us, you'll be covered by a one-year warranty.