Product Description

The 2AD104C-B35OB1-DS06-A2N1 servo motor is manufactured by Bosch Rexroth. The servo motor is comparable in noise level to a vacuum cleaner, weighing 60 kg and operating at 70 dB(A). Because of its ability to operate in a temperature range of 0 to 40 degrees Celsius, it may be used in a variety of industrial settings. Thermal protection and electrical safety are guaranteed by the motor's insulation class F. To ensure ideal operating temperatures, the motor is fitted with a radial blower that actively cools it by forcing air from side B to side A. The blower uses 60 VA of electricity.

The motor is protected from dust and water jets by its IP65 protection class, and it is also protected from solid objects bigger than 1mm and water splashes by its IP24 classification on the blower. The nominal voltage for the blower of the 2AD104C servo motor may be set to either 230V or 115V, which can accommodate both standard industrial and commercial electrical supply. It operates at a standard frequency of 50/60 Hz, which gives it regional flexibility. With a 200 m^3/h medium air volume, the blower, which cools the engine, ensures effective heat dissipation while in use.

Performance-wise, the motor can handle modest loads since it has a rated torque of 52 Nm. It strikes a balance between speed and power by producing this torque at a rated speed of 800 rpm. The motor's total output capability is indicated by its rated power of 4.4 kW. This performance is attained by the motor using a rated current of 10.0 A. The motor may reach an amazing maximum speed of 9000 rpm, however, this is only possible at 3500 rpm when an ECODRIVE03 controller with certain feedback settings is used. The rotor's moment of inertia, which is 0.027 kgm^2, affects the motor's capacity for dynamic reaction and acceleration. Our warranty is valid for one year after your purchase from us.