2AD104C-B05OL7-CS06-A2N1

Product Description

AC motors are classified into two main categories, one is synchronous motors and the other one is asynchronous motors. Asynchronous motors are also known as induction motors. The 2AD104C-B05OL7-CS06-A2N1 is Bosch manufactured asynchronous motor that is tested in-house for effective operations and safety. Bosch Rexroth manufactures a series of asynchronous motors with differing drive power and different interfaces for application-specific uses. The motor can deliver a speed of 1600 rpm, and with standard bearings, it can produce a speed of 9000 rpm.

The 2AD104C-B05OL7-CS06-A2N1 has no holding brakes and flange type mounting style. The power is connected from the top position and power is extracted from the left side of the blower power plug. To prevent the motor from heating, the motor has in-build a cooling system of the radial blower. The blower arrangement is below and the nominal voltage is 230 V with a 10 percent variant. The radial blower direction is from B to A and consumes a power of 60 VA. The winding code of 2AD104C-B05OL7-CS06-A2N1 is CS, and the motor feedback is digital servo feedback. The driven shaft is plain and simple but this machine comes without sealing rings. Customization is offered, so the client can order motor as per its requirements.

It is without shaft end side B, and the vibration severity grade of the motor is R. The international protection class of the motor and blower is IP 65, and IP 24 respectively. It has the F class insulation according to the standards of DIN VDE 0530-1. The continuous torque at a standstill and the continuous current at the standstill of the 2AD104C-B05OL7-CS06-A2N1 is 48 Nm and 20.5 A. These values are the same as rated torque and current as there is no derating.