2AD104C-B05OD1-CS06-C2N1

Product Description

Rexroth’s 2AD motor class is a well-known industrial motor series that has been around for several decades. These motors have proven their prowess in driving loads continuously, maintaining a stable temperature profile, and bringing substantial results. Like other motor series by Rexroth, the 2AD motor line features different motor frames and size. Each of these combinations leads to unique motor variations that cater to specific applications. Speaking of variation, the 2AD104C-B05OD1-CS06-C2N1 is a 2AD motor that combines unique capabilities and features in a single unit. 

The 2AD104C-B05OD1-CS06-C2N1 is equipped with a CS winding, which allows it to transmit a nominal torque of 48 Nm at the rated speed of 1500 rpm. The motor windings influence how much current flows through the motor during operation. Consequently, the rated current affects both the rated power and torque of the motor. The relationship between current and torque is linear for most motors. As the current increases, the torque output of the motor also increases if all other parameters retain their original values. The 2AD104C-B05OD1-CS06-C2N1 has a standard bearing, allowing it to reach a very high speed of 9000 rpm. For this motor, the loads are connected to a sealed shaft. 

The 2AD104C-B05OD1-CS06-C2N1 employs digital servo feedback for interpreting motor parameters during normal operation. To maintain a permissible operating temperature, the axial blower fan units of the 2AD104C-B05OD1-CS06-C2N1 facilitate faster surface cooling. The air current direction of the mounted blower fans is from the rear to the shaft side. The power terminal box of this motor model is on the top, which is adjustable when needed. For more elaborate explanations about the 2AD104C-B05OD1-CS06-C2N1's powerful capabilities, a thorough consultation of Rexroth’s manual is a must.