Product Description

The servo motor, model number 2AD104B-B05OB4-CS06-C2N1, is a product of Bosch Rexroth. A radial blower on this servo motor directs cooling air from side B to side A of the motor. The blower has a tolerance of +/- 10%, runs at a voltage of 230V or 115V, and uses 60 VA of electricity. Its frequency is 50/60 Hz. Its airflow is 195 cubic meters per hour on average. A digital servo feedback encoder, which uses 512 sinusoidal impulses per revolution at 1 Vpp (volts peak-to-peak), is another component of the motor that offers accurate position feedback. A shaft sealing ring further shields the motor shaft from impurities.

30 Nm of rated torque may be achieved using this motor. Torque, which is a unit of measurement for rotational force, describes the amount of force a motor can apply to rotate a load in this context. Revolutions per minute, or rpm, is the speed at which the motor can provide its rated torque. Its rated speed is 1100 rpm. A motor with a rated power of 3.5 kW (kilowatts) can provide that much power while functioning normally.

⁤When this motor is running at its rated power and speed, it requires 9.8 A (amperes) of electricity from the power source. ⁤⁤Moreover, the stationary constant torque and current are 30 Nm and 9.8 A, respectively. ⁤⁤The motor's maximum continuous current and torque while it is not spinning are represented by these figures. ⁤⁤The motor does not lose torque or power before reaching its rated speed, as seen by the derating speed of 1100 rpm. ⁤This module has a mass of 55 kg. The maximum speed (nmax) of this servo motor is 9000 rpm. This device is covered with a one-year warranty.