2AD104B-B05OB4-CS06-B2N1

Product Description

Bosch Rexroth stands as the manufacturer of the 2AD104B-B05OB4-CS06-B2N1 servo motor. A radial blower is fitted with this servo motor to provide cooling. In order to provide effective heat dissipation during operation, this blower actively forces air through the motor, entering through side B and leaving through side A. The blower has a tolerance of +/- 10% and runs at a nominal voltage of either 230V or 115V with a frequency of 50/60 Hz. It delivers 200 cubic meters of medium air volume per hour with a power consumption of 60 VA. This servo motor can generate a rated torque of 30 Nm in terms of performance. In this case, torque refers to the amount of rotational force that the motor is able to produce in order to drive the attached load.

With a rated speed of 1500 revolutions per minute (rpm), the 2AD104B-B05OB4-CS06-B2N1 motor can run continuously at this speed under typical load circumstances. The mechanical power it can generate at this speed is 4.6 kilowatts (kW), or rated power. This power output is obtained by the motor by drawing a rated current of 11.9 amperes (A).

As long as the motor is not spinning, its maximum stationary continuous current and torque are available. The motor can sustain its entire rated load even while it is not in motion because, in this instance, they are the same as the rated current and torque. The motor's torque starts to diminish as speed increases at a speed known as derating speed. This motor does not undergo derating and may provide its entire rated torque up to its maximum speed since the derating speed is equal to the rated speed. This module comes with a one-year warranty.