Product Description

The 2AD104B-B05OB1-CS06-B2N2 is a Rexroth servo motor with a winding CS. This motor has a size of 104 and a motor length of B. The 2AD104B-B05OB1-CS06-B2N2 motor has a rated speed of 1500 rpm, and at maximum speed, it can attain a torque of 29 Nm. The motor can output a rated torque of 29 Nm and requires a power of 4.6 kW while drawing a current of 11.9 amperes. It is recommended to use power cables of with a minimum cross-section of 2.5mm^2 to prevent overheating of the wires.

Since the motor is an Asynchronous motor it has three poles that can be excited individually with the help of a frequency inverter to vary the speed of the motor. The motor can reach a maximum speed of 9000 rpm with standard bearings. To cool the motor's internals, the 2AD104B-B05OB1-CS06-B2N2 relies on axial cooling fan that sucks the air from the surroundings inward, causing it to flow through the internals of the motor. This design has international protection class IP-65 for motor protection and IP-24 for blower protection. This motor is mounted using a flange-mounting method that ensures stable and secure installation.

To control the position of the motor shaft,2AD104B-B05OB1-CS06-B2N2 features a digital servo feedback in which the feedback collects the number of rotations and passes on this information to the controller, known as the closed-loop system. The motor comes with a shaft balanced with the entire key without a shaft sealing ring. The motor does not feature a holding brake causing the motor to spin continuously when the power goes out. This servo motor has a vibration severity grade of R, which is the lowest but can be reduced when the motor is attached to a flange mount.