2AD104B-B05OB1-CS06-A2N1

Product Description

The 2AD104B-B05OB1-CS06-A2N1 belongs to the 2AD motors family tree and it is manufactured by Rexroth with a body frame of type 104 and motor length D. The derating value of the motor is zero leading to a conclusion that rated current is equal to continuous current at standstill. Both provide a value of 11.9 amperes. The values are the same because the derating value is zero. In the same pursuit, the rated torque and continuous torque at a standstill give the same value of 29 Nm with no derating.

The cooling method used in this variant is the axial blower. The direction of the airflow is blowing and it uses a power supply of 230 V. The power consumption of the blower motor is 60 VA. Dirt can reduce the performance of the blowers and lead to thermal overload of the motors. The rated speed of the 2AD104B-B05OB1-CS06-A2N1 is 1500 rpm which can maximize up to 9000 using the ECODRIVE03 drive controller with feedback. It has the digital servo feedback and the position of the power connection is on the top. The variant has the flange type mounting style.

The noise level of 2AD104B-B05OB1-CS06-A2N1 is tested out at a distance of 1 meter and at PWM 4kHz. The noise behavior at the tested value is 70 dB. The protection class of the spindle motor and blower are IP65, and IP24 respectively. Shavings or large dirt particles can also penetrate the blower screen. It is advised not to disturb or reduce the factory-installed protection class of 2AD motors. Materials like dirt and fluids can easily penetrate or enter in motor in the case of vertical installation. It can cause malfunctions or failures, and the grease lifetime is reduced by 50%.