2AD104B-B05OAB-CS0D-A2N1

Product Description

The 2AD104B-B05OAB-CS0D-A2N1 is an asynchronous motor that provides a rated speed of 1500 rpm. With no derating in effect, induction motors provide a constant torque until the rated speed. Derating is present when there is a drop in torque and power before reaching the rated speed nN. This only occurs in some types of motor windings. The minimum cross-section area of the power connection is 2.5 mm2. This motor variant has the best insulation class F for protection.

The 2AD104B-B05OAB-CS0D-A2N1 comes without holding brake and has the incremental motor encoder of, 2500 increments. The incremental output voltage is 1 volt peak to peak. The encoder output signal is sinusoidal. The encoder interface on the control device and the encoder cable must be compatible with the selected motor encoder. The driven shaft is plain and comes with a seal to protect from against spraying fluids. It has the deep-groove standard type ball bearings, and this variant is dynamically balanced R.

The 2AD104B-B05OAB-CS0D-A2N1 has the winding code CS where C indicates electrically different windings, and S stands for WYE (star) connection. The motor international protection class is IP65 which means comprehensive protection against dust and water. The class of blower motor is IP 24, and the radial blower placement is below in this variant. It uses 115V to operate and consumes 60 VA power. The motor blower has 200 cmh medium airflow to cool the motor winding. The motor has a maximum speed of 9000 rpm and is limited due to mechanical construction. The rated current and continuous standstill current is the same in this motor and it has a value of 11.9 A. It is the same case in rated torque and continuous standstill torque as both give the same value.