Product Description

The 2AD101D-B05OB2-BS03-B2N1 is a specific product model that you can get from Rexroth 2AD101D motor class. Equipped with a BS winding type, this motor has a rated power of 9500 watts. During nominal operating conditions, the motor has a rated terminal voltage of 259 V. The terminal voltage for motors is the voltage measured on the load side. This voltage is not to be confused with the generated emf of the motor, which can only be computed if the voltage across the windings is known or can be derived. In its rated condition, the motor has a loading capability of 60 Nm. 

In terms of its mechanical loadings, the permissible axial load for the 2AD101D-B05OB2-BS03-B2N1 is stalled at 30 N. This small axial load for might partially be due to the small diameter of the shaft. In terms of the radial force component, the 2AD101D-B05OB2-BS03-B2N1 has very high permissible values depending on the rotor speed. For instance, at a speed of 2000 rpm, the maximum radial load permissible is 3300 N. Meanwhile, at the same speed and at 60 mm away from the shaft base, the permissible radial force is 2900 N. The radial force component varies with speed and distance. It is described using a force-versus-distance plot, with each curve representing a particular motor speed. Generally, higher speeds lead to lower values of permissible radial forces. The faster the rotor spins, the harder it is for the rotor to withstand forces acting along its radial surface. 

The motor may be mounted via its flange as long as the flange screws are secured and proper clearance is maintained on the blower side for airflow. The axial blower fans of the 2AD101D-B05OB2-BS03-B2N1 require 230 V of supply to cool the motor efficiently during operation.