2AD101D-B05OA5-BD03-B2N1

Product Description

From the wide collection of synchronous and asynchronous motors of Rexroth Bosch Group, 2AD101D-B05OA5-BD03-B2N1 is one that falls under the category of asynchronous motors. With a broad range of functionality, this motor is of great value. 

It has an S grade for vibration severity and standard bearings. The output shaft has no shaft seal and the side B shaft end is also absent but it is well-balanced with the entire key. The control system of this motor can accurately measure and track the speed or motion of the motor with high-resolution motor feedback. The holding brakes are absent in 2AD101D. The heat generated by the motor due to functioning is evacuated by axial blowers that require an AC voltage of 115 volts. The winding designation is BD and the power terminal is located at the top of the motor.

The motor's power terminals, where electrical connections are made, are located on the A-side of the unit, housed within a terminal box mounted on the blower. The torque produced by the motor under optimal conditions and without overheating is 60 Nm and the nominal current consumption of 2AD101D is 42 A. A nominal voltage of 187 volts is required for the operation of this motor and the rated power output of this motor under standard operating conditions is 9.5 kW. The inertia of the rotor is 0.028 kgm2 and the thermal time constant is 45 minutes. The minimum connection cross-section is 10 mm2 the average sound pressure at a distance of 1 m with 4 kHz Pulse Width Modulation (PWM) is 70 dB (A) and the ambient temperature lies between 0 ℃ to 45 ℃.