2AD101D-B05OA5-BD03-A2N1

Product Description

2AD101D-B05OA5-BD03-A2N1 belongs to the category of servo, asynchronous motors of Rexroth Bosch Group. As it is an AC motor, it converts alternative current into mechanical energy and also requires AC voltage for operation. 

The motor size is 101 and the windings designation is BD. The certification from DIN VDE 0530 Teil.1 depicts that 155 ℃ is the maximum permissible operating temperature for the insulation material that is used in this motor. The compliance of the motor with DIN ISO 2373 reflects that the motor is well-balanced. For optimal performance of the motor, the ambient temperature should be somewhere between 0 ℃ to 45 ℃. The mass of the motor without holding brakes but with a blower is 60 kg and the length is D. A flange is present so that it can be attached to any other device or surface.

However, securing with bolts and screws is crucial. The power terminal is present on the top and the connector is present on the A side of the motor with a terminal box on the blower by which an electrical connection can be established. 2AD101D has no holding brakes and the shaft sealing ring is also absent. Moreover, there is no shaft end at the side B of the motor. It has standard bearings and R represents the vibration severity grade. The rotor of the motor has an inertia of 0.028 kgm2 due to which the rotor can easily accelerate and decelerate. The thermal time constant is 45 minutes and the minimum connection cross-section is 10 mm2. The base speed of the rotor of this motor is 1500 revolutions per minute but it can be exceeded up to 9000 revolutions per minute as it is the peak speed of this motor.