2AD101D-B05OA2-BS03-C2N1

Product Description

2AD101D-B05OA2-BS03-C2N1 is the asynchronous motor that belongs to the AD series which was launched by Rexroth Bosch Group. As it is an AC motor, it converts alternative current into mechanical energy to perform a variety of tasks.

The size of this motor is 101 and its length is D. It can be attached to any surface or device with the help of flanges and can be secured with bolts and screws. The power terminal position is at the top of the motor and the connector is present on side A of the motor with a terminal box on the blower. The cooling of the motor is carried out by axial blowers that flow air from direction A to direction B. The designation of the winding is BS and holding brakes are absent in 2AD101D. It has a smooth shaft with a shaft seal to avoid any kind of leaking and the absence of a shaft end on the side B facilitates the mounting of the motor.

The nominal power it consumes is 9.5 kW and the nominal torque it produces is 60 Nm. The nominal current and nominal voltage values are 31 A and 259 V respectively. The base speed at which the motor rotates is 1500 revolutions per minute but it can achieve the peak speed of 9000 revolutions per minute. The inertia of the rotors without holding brakes is 0.028 kgm2 and the thermal time constant of this motor is 45 minutes. The minimum connection cross-section is 10 mm2 and the average sound pressure level at 1 meter with 4 kHz Pulse Width Modulation (PWM) is 70 dB (A). The overall mass of the motor with blower after excluding the mass of holding brakes is 60 kg.