2AD100D-B05OB2-AS01-B2N1

Product Description

2AD100D-B05OB2-AS01-B2N1 belongs to the servo motors category of the motors manufactured by Rexroth Bosch Group. 

The motor can be attached to any surface through flanges and secured with bolts or screws. The position of the power terminal is at the top of the motor and the connector for the power terminal output is present on side B. It is equipped with standard bearings and the vibration severity grade is R. The output shaft of 2AD100D lacks a shaft seal, is balanced with the entire key, and has no end on the side B. Holding brakes are not present in this motor and the cooling has been done by axial blowers to keep the heating components in a functioning state and avoid any kind of damage. In the cooling system, the air flows in direction B to direction A when 230 V of AC voltage is provided. The total power consumption by the cooling system only is 60 VA and the average air volume is 230 m3/h. 

The size of the motor is D and the winding designation is AS. The average sound pressure level at 1 meter when Pulse Width Modulation is equal to 4 kHz is 70 dB (A). The minimum terminal cross-section is 6 mm2. The mass of the motor is 49 kg and the ambient temperature ranges from 0 ℃ to 45 ℃. As per the DIN CDE 0530 section 1 insulation classification is F which depicts that the insulations of the motor can withstand 55 ℃ temperature. The nominal power 2AD100D requires for operation is 7.5 kW and the nominal current consumption is 35 A. The nominal torque produced by this motor is 48 Nm and the value for the nominal voltage required is 173 volts.