2AD100D-B05OB1-AS23

Product Description

The 2AD100D-B05OB1-AS23 is a durable asynchronous servo motor produced by Bosch Rexroth Indramat according to international quality and safety standards. The motor when used in combination with a compatible drive controller operates at a high accuracy over a broad speed range. The feedback integrated into this asynchronous servo motor functions with a resolution of 1/2,000,00th revolutions, this high resolution helps the drive controller to easily monitor and control the speed, position, and torque output of the motor. The installation of this servo motor can be done by flange or foot installation, this flexibility meets the demands of various installation conditions and requirements. Unlike other industrial motor series, the 2AD100D-B05OB1-AS23 asynchronous motor requires no maintenance, opening the housing of the motor without permission will void the warranty covering the device.

The 2AD100D-B05OB1-AS23 servo motor requires a nominal input current of 35 amperes for operation, it also requires a nominal voltage of 173 volts. At this nominal current and voltage, the asynchronous motor generates a nominal torque of 48 newton meters, and operates at a base speed of 1500 revolutions per minute. The thermal time constant of this motor during operation is 45 minutes, while the rotor inertia is about 0.028 kilograms per meter square. The 2AD100D-B05OB1-AS23 motor is environmentally friendly, during operation, the average noise pressure level at 1 meter from the motor is about 70 decibels.

The 2AD100D-B05OB1-AS23 motor contains an axial air blower that generates air current and helps to dissipate excess heat from the servo motor via surface cooling. The holding brake integrated into the motor is an electrically released holding brake, it helps to retain the load connected to the shaft of the motor when the motor is at a standstill.