2AD100D-B05OB1-AS11

Product Description

The 2AD100D-B05OB1-AS11 is an AC servo motor manufactured by Bosch Rexroth Indramat. The frame size of this servo motor is 100, which is specified according to the shaft height. The increasing frame lengths are denoted with B, C, and D. This module has a frame length of D. The higher frame length will give you higher continuous torque. The position of the power connector is on the top surface. This motor requires a blower to dissipate heat produced during work. In this case, this device uses an axial blower that moves the air along the axis of rotation. This servo motor needs a 230-volt AC power supply to operate the blower.

To keep the shaft in position when no power is supplied, a holding brake is used to prevent the turning effect. The torque rating of the brake used in this module is equal to 100 Nm. This means the holding brake can resist a rotational force of not more than 100 Nm. This is the force of 100 N applied at a distance of 1 meter from the axis of rotation. The brake is clamped and holds the shaft when an electrical signal is applied. And when the signal is removed, the brake is released. It relies on electronic signals for activation and deactivation.

The mounting type for this servo motor is B05. Which means, the device is attached to a machine using a flange. B05 refers to the mounting style. This is an asynchronous motor, also known as an induction motor. The torque is obtained from electromagnetic induction from the stator winding. The acceptable range of temperature for this module is between 0°C and 45°C. Crossing these temperature limits can lead to premature wear or even damage. You get a one-year warranty on this servo motor.