2AD100D-B05OB1-AS03-C2N1

Product Description

The 2AD100D-B05OB1-AS03-C2N1 is a type of asynchronous motor that has the rated speed of 1500 rpm, maximum speed of 9000 rpm, and motor feedback of high resolution. The thermal time constant of this variant is 45 minutes, and rotor inertia is 28 x 10^-3 kgm². The mass of the machine is 60 kg, and the insulation is F class to provide protection. The motor size is D with winding designation of AS, and motor length of D. The motor nominal torque is 48 Nm and nominal current is 45 A.

The motor 2AD100D-B05OB1-AS03-C2N1 average sound pressure level is 70 dB at a distance of 1 meter and pulse width modulation at 4 kHz. The construction type is B05 with flange mounting and output shaft with smooth shaft. The shaft seal is a rubbing seal. Wear and frictional heat occur at the lip of this seal. It is suggested to sufficiently lubricate the points of contact for optimal operation. The bearing type is standard, and the mechanical service life of the bearings equals 20,000 working hours. Non-conforming loads cause the lubricant to be consumed in less than 20,000 working hours. This has an adverse effect on bearing service life.

The motor 2AD100D-B05OB1-AS03-C2N1 uses an axial blower cooling method where air streams from B to A. The average air volume of the motor is 230 m³/h and the power consumed for cooling from B to A through axial blower is 60 VA. The electrical connections on the 2AD motor include the power connection with the motor's NTC thermistor connection and holding brake connection, the motor feedback connection, and the motor blower connection. The power is drawn from the connector terminal at side B. The vibration severity grade of this spindle motor is R (reduced).