Product Description
The 2AD100D-B05OB1-AS03-B2N2 is a main spindle asynchronous motor that requires no maintenance. It comes with motor feedback of high resolution. The motor feedback measures the rotor position and signals it to the drive. This regulates speed and rotor position. It functions with a resolution of 1/2000000th revolution. This kind of spindle motor has a motor frame size of 100 and a motor length of D. The admissible temperature ranges from 0° to +45°C and permissible installation altitude is up to 1,000 meters above sea level. The nominal power, torque, current, and voltage of this series of AD100D motors are 7.5 kW, 48 Nm, 35A, and 173 V.
The 2AD100D-B05OB1-AS03-B2N2 comes with housing and cover that are, per DIN 40050, protected against contact with parts either moving or to which voltage is being applied, and, penetration by solid objects and water. It is recommended to prevent contamination by liquids penetrating the output shaft when attaching the motor. The thermal time constant is 45 minutes, and the minimum terminal cross section EN 60204 is 6 mm2. The machine mass is 60 kg including blower weight and without the holding brake. The Insulation classification as per DIN VDE 0530 is F.
The 2AD100D-B05OB1-AS03-B2N2 has the output shaft balanced with a key. A balanced, interconnecting part (toothed wheel, etc.) must be used. The keyway in the hub is not dependent upon the length of the key. The output shaft comes without the seal, and power is extracted through the connector at side B. The construction is flange-type with a top power terminal position. The cooling mode is an axial blower (air flow from B to A) with a power supply of 230V AC. The winding designation is AS and this variant comes without a holding brake. The vibration severity grade is S (special) and the motor is integrated with an NTC thermistor to cool up the motor windings at continuous operations.
Wake Industrial Warranty
