Product Description
The 2AD100D-B05OB1-AS03-B2N1 is a type of spindle asynchronous motor with a rated speed of 1500 revolutions per minute. It has the length D and a motor size of 100 that can generate speeds up to 9000 rpm. 2AD motors are available in versions B05 for flange mounting, and B35 for flange and foot mounting. The formation of the motor consists of flange mounting and the cooling mode is axial blower. A 2AD series motor is always equipped with a blower on side B.
It is advised to not allow liquids (water, oil, coolant, etc.) to run into the motor along the output shaft. The 2AD100D-B05OB1-AS03-B2N1 comes with high-resolution motor feedback and without holding the brake. The high resolution feedback motor is used with KDA/TDA/RAC/DDS02.2/DKR/HDS. The absolute and relative accuracy of this series of motors is ±0.02o and 0.01’. The side B shaft end is without any encoder. The output shaft is balanced with the entire key and it doesn’t come with shaft sealing. Seals are unable to prevent liquids from penetrating the motor.
The thermal time constant of the motor 2AD100D-B05OB1-AS03-B2N1 is 45 minutes, and the motor NTC thermistor is built into the motor windings. The NTC thermistor monitor in the drive protects the motor against overheating. The winding type is AS and the insulation class of this spindle motor variant is F. The weight of the spindle motor of this series is 60 kg, and the rotor inertia is 0.028 kgm2. The main spindle motor is dynamically balanced as per balance class R (reduced) as per DIN ISO 2373. The power terminal position is on the top with the nominal power of 7.5 kW and the power consumed to the motor blower is 60 VA. The nominal torque is 48 Nm, and the nominal current is 35 A.
Wake Industrial Warranty
