Product Description

2AD100D-B05OA4-AS03-B2N1 is a part made by Bosch Rexroth as part of the 2AD series of motors. The motor has three electrical connections: a motor feedback connection, a motor blower connection, and a power connection with the motor's holding brake and NTC thermistor connection. The motor's surface is cooled by blowing air across the motor through a fan that is fitted to the motor. The motor's blower ensures a sufficient supply of air for cooling the motor as it runs, maintaining an ambient temperature that allows the motor to perform effectively.

The motor is designated as 2AD, and the motor size is 100. The motor does not support foot mounting and only uses flange mounting for installation. The motor is fitted with a radial blower that flows air from the B side to the A side via a blower to the right of the motor. However, there is no holding brake with this particular motor. The motor does not have digital servo feedback, but it does have high-resolution motor feedback that helps in the position and control of the motor. The motor's output shaft is balanced with the entire key but is not supplied with a shaft seal.

The motor is fitted with standard bearings, which are deep-grooved bearings that are lubricated for lifetime service, hence allowing the motor to operate without requiring any maintenance during its typical performance. The maximum speed of the motor is 9000 min-1, and the motor's base speed is 1500 min-1. The motor works best in ambient temperatures ranging from 0 to 45 degrees Celsius. The motor's weight is 60 kilograms, including the motor's blower. Finally, you can use the motor as a servo motor or a main spindle motor.