2AD100D-B05OA1-AS23-B2N1

Product Description

The 2AD100D-B05OA1-AS23-B2N1 is a unit in the 2AD series of asynchronous motors that the Bosch Rexroth Indramat group fabricates. The motor comes equipped with an axial motor blower fan, which has a power consumption rating of 60 VA and operates at a nominal voltage of 230 volts. The fan is rated to move an average volume of 230 m³ per hour. The unit features a holding brake that utilizes the electrical release operating principle and has a holding torque of 24 Nm. The brake has a release delay of 100 ms, a clamping delay of 60 ms, and a moment of inertia of 0.0007 kgm². The nominal current of the holding brake is 0.9 A while its nominal terminal voltage is 24 V +/- 10%.

The 2AD100D-B05OA1-AS23-B2N1 has an output shaft that is balanced with key. The shaft doesn’t have a shaft seal and there’s no side B shaft end on the unit. It has a vibration severity level of R and uses standard deep-groove bearings. The motor has its power connector on the top and it goes to the A side of the unit. The unit is D-length and its motor size is 100.

The 2AD100D-B05OA1-AS23-B2N1 belongs to the F insulation class. It outputs an average sound pressure of 70 decibels at 1 meter. The unit has a nominal current of 35 amperes. Its windings code is AS and it runs at a base speed of 1500 min^-1. The connection of the unit’s holding brake is integrated right into the power terminal. The motor has an NTC thermistor integrated into its windings and a monitor in the drive protects it from heat damage.