2AD100C-B05OR2-AS03-B2N1

Product Description

2AD100C-B05OR2-AS03-B2N1 falls under the category of servo motors manufactured by Rexroth Bosch Group. The size of the motor is 100 and the length is C. A flange is present in this motor by which it can be attached to any surface.

The power terminal is present on the top of the motor and the power connector can be found on the right side to establish the power connection. The cooling system of the motor comprises of axial blower in which air flows from A direction to B direction. This cooling system consumes 70 VA of power and the nominal voltage at which it operates is 230 V. The average air volume of the air produced by axial fans is 230 m3/h. 2AD100C lacks a holding brake but is equipped with high-resolution motor feedback. The output shaft has no shaft seal but it is balanced with the entire key. However, the side B shaft end is absent. It has standard bearings and the vibration severity grade is R.

The windings designation is AS and the output power that the motor can deliver continuously under specified operating conditions without overheating or damage is termed nominal power and the value is 5.5 kW. The nominal torque value is 35 Nm and the nominal current consumption is 27 A. The motor requires a nominal voltage of 168 volts for a smooth operation at which it rotates at a base speed of 1500 revolutions per minute. However, the speed can be increased to 9000 revolutions per minute as well. The inertia of the rotor is 0.021 kgm2 and the thermal time constant is 40 minutes. The average sound pressure level at 1 meter (Pulse Width Modulation = 4 kHz) is 70 dB (A).