2AD100C-B05OR1-AS03-B2N2

Product Description

2AD100C-B05OR1-AS03-B2N2 is a servo motor designed for use in environments with a high level of vibration. It is rated for vibration severity grade S. It has a shaft with key. The rotor is balanced with the key that is used in the hub shaft assembly. The motor rotor is balanced with full key. In this arrangement, the keyway in the hub is independent of the key length. The shaft does not include a seal and belongs to IP40 category. The servo motor supports high-resolution feedback. Accurate motor feedback allows precise control of motor speed and position. Therefore, 2AD motors are well suited to applications requiring high precision, such as reshaping machines, packaging machines and printing machines. Bosch 2AD motors support axial or radial blowers. The 2AD100C-B05OR1-AS03-B2N2 is equipped with a 230 Volts AC axial blower with 60 VA power requirement.

As per the type code, the 2AD100C-B05OR1-AS03-B2N2 is a motor with frame size 100, frame length C and winding code AS. The motor is cable of delivering 5.5 kilowatts power output and 35 Nm torque output. Its base and maximum speeds are 1500 RPM and 9000 RPM respectively. Performance according to specified ratings is depending on ambient conditions. Bosch recommends 0 to 45 degrees Celsius temperature and 0 to 1000 meters altitude for the servo motor. Motor operation outside these limits is possible but not recommended as it leads to derated performance. The 2AD100C-B05OR1-AS03-B2N2 motor supports flange mounting. Size of the flange is 192 millimeters and it features four 14 millimeter mounting holes. The power connection and feedback connections on the motor are IP65 rated: they are fully protected against dust and low-pressure water jet ingress.