2AD100C-B05OR1-AS03-A2N2

Product Description

2AD100C-B05OR1-AS03-A2N2 is a servo motor. 2AD motors are available in power output ratings ranging from 3.5 to 9.5 kilowatts. The rated output of 2A100C motors is 5.5 kilowatts. Nominal torque output of the servo motor is 35 Nm. Nominal current output of the servo motor is 27 Amps. Nominal voltage for the motor is 168 Volts. Inertia of the motor rotor is 0.021 kg m². The sound level measured at 1 meter distance from the operating motor is 70 dB(A). The specified ambient temperature range is 0 to 45 degrees Celsius. 2AD motors support optional holding brakes from the electrically engaged and electrically released categories. If required, operators can specify holing brakes for their 2AD motors. 2AD100C-B05OR1-AS03-A2N2 is a servo motor that supports high-resolution motor feedback. Additional available feedback options include digital servo feedback and feedback with integrated absolute encoder.

The 2AD100C-B05OR1-AS03-A2N2 motor has a plain shaft that does not include a shaft seal. Additional 2AD motor shaft options include plain shaft with seal, shaft with key but without seal, and shaft with key and seal. The exact motor configuration must be specified at the time of ordering. A rating plate attached to the housing allows motor identification. Operators and their staff must check information listed on the rating plates when they receive shipments containing 2AD motors. Bosch has designed the 2AD100C-B05OR1-AS03-A2N2 motor for flange mounting. An axial blower is installed on the motor. This blower requires 230 Volts AC power. The main power connection is located on the top of the motor and it points to the right. Protection category of this connection is IP65. Protection category of the feedback connection is also IP65.