2AD100C-B05OR1-AS03

Product Description

2AD100C-B05OR1-AS03 is a 2AD series AC servo motor. It is especially designed by Bosch Rexroth for high-performance industrial applications. Typical 2AD motor applications include reshaping machines, packaging machines and printing machines. 2AD motors provide a wide speed range when used in combination with compatible drive controllers. 2AD motors support feedback for rotor position and speed. This feature allows their use for applications requiring high accuracy and precision. 2AD motors support flange or foot mounting. Holding brakes are also available as an option. Operators can specify required 2AD motor options at the time of ordering. The 2AD100C-B05OR1-AS03 is an axially cooled servo motor. The axial blower on the motor requires 230 Volts AC input. The motor also supports high-resolution motor feedback. A holding brake is not available on the motor.

2AD100C-B05OR1-AS03 is a motor that only supports flange mounting. The flange is a metal plate attached to one end of the motor housing. Performance specifications for the motor include 5.5 kilowatts rated output, 35 Nm nominal output torque and 27 Amps nominal output current. Thermal time constant for the motor is 40 minutes. The motor gets power from the motor controller. A properly sized power cable is essential for avoiding overheating and fires. Bosch recommends using power cables with minimum 4 mm² diameter for the servo motor. The power connection is on top and points to the right. Weight of the 2AD100C-B05OR1-AS03 servo motor is 49 kilograms. To prevent output derating, the ambient temperature should be between 0 and 45 degrees Celsius. Insulation classification for the 2AD100C-B05OR1-AS03 motor is F. Centering diameter of the motor is 130 millimeters. Its plain shaft has a diameter of 32 millimeters.