Product Description
The Bosch 2AD100C-B05OL2-AS13-B2N1 is an AC motor from the 2AD series. These motors are designed as spindle drives and servo drives for packaging machines, reshaping machines and printing machines. 2AD motors are maintenance-free asynchronous motors. This means the shaft speed is not synchronized to the input current frequency. Ambient temperature for 2AD motors must be less than 45 degrees Celsius and must not exceed 55 degrees under any circumstances. The motor output derates in a linear fashion between 45 and 55 degrees, reaching 20% at the latter. The motor output derates in a non-linear fashion between 1000 and 5000 meters, reaching 35% at the latter. The 2AD100C-B05OL2-AS13-B2N1 is a motor designed for flange mounting. The power connection is on the top and points towards the left. The motor supports surface cooling with an axial blower rated for 230 Volts AC. Weight of the holding brake is approximately 1.5 kilograms.
The motor is equipped with an electrically engaged holding brake. Holding torque of the brake is 35 Nm and it requires a 24 Volts DC signal. The maximum braking energy is 20,000 Ws, and the release and clamping delays are 50 milliseconds. The motor supports high-resolution motor feedback. The main shaft includes a key but is without a shaft seal. Standard bearings are used for motor construction. Nominal power and torque for the motor are 5.5 kilowatts and 35 Nm respectively. The base speed is 1500 RPM and the peak speed is 9000 RPM. The nominal current of the 2AD100C-B05OL2-AS13-B2N1 motor is 27 Amps. Average sound pressure produced by the motor is 70 dB(A) measures at 1 meter. Mass of the 2AD100C-B05OL2-AS13-B2N1 motor is 49 kilograms.
Wake Industrial Warranty
