2AD100C-B05OB2-AS23-A2N1

Product Description

2AD100C-B05OB2-AS23-A2N1 is a servo motor. In combination with a controller, it is primarily used as part of a main spindle drive or a servo drive system. Typical applications include packaging machines, printing machines, and reshaping machines. The motor is protected against contact with moving parts and penetration by water and solid objects. The motor has a smooth shaft without seal. Protection rating of the shaft is IP40 which means that it is protected against solid objects with dimensions greater than 1 millimeter, but not against water ingress. The plain shaft is suitable for friction-locked shaft-hub connections. The higher run quality and the backlash-free connection between shaft and hub are a significant advantage of the plain shaft design. Bosch recommends using tension sets, pressure sleeves similar elements for coupling pinions, belt discs or similar drive elements.

The power connection and the feedback connection are both IP65 rated, meaning that they are protected against dust and against water from low-pressure water jets. The motor has an axial blower with IP54 protection rating. This rating means that the blower is protected against dust and against water sprayed from any direction. The 2AD100C-B05OB2-AS23-A2N1 is a motor that supports flange mounting. Operators must prevent liquids, such as water, oil, coolant, etc. from running into the motor along the output shaft. Operators must also prevent contamination by liquids penetrating the output shaft when attaching the motor. The motor is equipped with lifetime lubricated deep-groove ball and cylindrical roller bearings. The service life of the bearings equals 20,000 working hours if the radial loads and average speeds listed in section product documentation are maintained. Lubricant consumption also has a significant effect on bearing service life.