2AD100C-B05OB2-AS13-A2N1

Product Description

2AD100C-B05OB2-AS13-A2N1 is a 2AD series servo motor. These motors are used in machine tools as main spindle drives and servo drives with high performance capabilities, printing machines, packaging machines, and reshaping machines. In conjunction with drive controllers, 2AD motors feature a broad speed range, and a broad speed range under field control of 1:6. The motor supports high-performance digital feedback: feedback measures rotor position and signals it to the drive. The 2AD100C-B05OB2-AS13-A2N1 motor is equipped with an electrically-engaged holding brake. The main shaft can be clamped into position at standstill using the holding brake. Therefore the main spindle is safely held in place within the machine tool. Brakes with electrical clamp are also available. The main motor shaft has a smooth design but does not include a shaft seal.

2AD100C-B05OB2-AS13-A2N1 is a motor that supports flange mounting. A flange is a flat plate attached to the motor. The flange has holes that must be aligned with holes on mounting surface. After hole alignment, the motor can be secured to the mounting holes with appropriate screws and nuts. Proper alignment and screw tightening are prerequisites for secure mounting, which has a direct impact on motor reliability and performance. The 2AD100C-B05OB2-AS13-A2N1 is a surface cooled motor with an axial blower. Power requirement of the blower is 230 Volts AC. The motor receives electrical power from the drive controller. The power connection is located on top of the motor and points towards the B side of the housing. Only accessories approved by Bosch should be used with the motor. Use of the motor for non-approved applications or in an improper manner will void the warranty and must be avoided.