2AD100C-B05OB2-AS03-C2N1

Product Description

2AD100C-B05OB2-AS03-C2N1 is a servo motor. It is made by Bosch Rexroth. The motor belongs to the category of asynchronous motors: its shaft speed and input current frequency are not synchronized. The motor has a smooth shaft with seal. The purpose of installing the seal is to protect the motor from environmental contaminants such as dust, oils, and moisture. The motor can be mounted in several positions, including with the shaft mounted upwards or downwards. Even with the shaft seal, operators should ensure that liquids do not run into the motor along the shaft. Diameter of the shaft is 32 millimeters and about 60 millimeters are available outside the main housing. Centering diameter of the motor is 130 millimeters and the motor length is 582 millimeters. Mass of the servo motor is approximately 49 kilograms.

2AD100C-B05OB2-AS03-C2N1 is a flange mounted motor. Size of the motor flange is 200 millimeters. The diameter of the mounting holes on the flange is 14 millimeters. Performance specifications for the motor include 5.5 kilowatts power output, 35 Nm torque output, 27 Amps current output, and 168 Volts output voltage. Sound pressure produced by the motor during use is 70 dB. The ambient requirements for operation with rated values include 0 to 45 degrees Celsius and 0 to 1000 meters altitude. The ambient conditions for operation with derated values include 45 to 55 degrees Celsius and 1000 to 5000 meters altitude. An axial blower on the motor produces 230 cubic meter per hour of airflow. Its power requirement is 60 VA and it is rated for 230 Volts AC. Only trained personnel should install the motor and participate in its operation and maintenance.