2AD100C-B05OB2-AS01-B2N1

Product Description

The 2AD100C-B05OB2-AS01-B2N1 asynchronous motor is designed to support flange mounting. The Bosch Rexroth motor has a shaft with no shaft seal and is balanced with the entire key. This product needs sufficient time to cool down after it has been turned off and before its components are accessed. The device can have high voltage levels on the housing without the protective conductor connection. This unit must encompass a balanced interconnecting part. Its keyway in the hub is independent of the length of the key. The motor portrays a 5.5kW nominal power rating. This product is safeguarded against a water jet sprayed from a nozzle onto the housing.

The device has an IP 40 protection rating for the output keyway shaft. This device portrays one tapped center hole on the small side of the shaft. The unit is not an ideal choice for output pinions featuring helical teeth. Its shaft hub should be secured axially as its connection is suitable for taking up torques in a constant direction. This motor is free of any side B shaft end. The product is fitted with only standard bearings. This device depicts suction action for the air stream through the blower from side A to side B. This asynchronous motor portrays a warranty period of one year.

The motor blower has a frequency rating of 50/60Hz with a tolerance of +/-10%. The unit should at no point in time encounter an axial force of more than 30N irrespective of the mounting orientation. Its installation elevation cannot go beyond 5,000m over the sea level. This product’s surface temperature rises to over 60 °C when it is in operation. The device has a flanged socket on the housing for the feedback connection. This unit cannot be fitted with a gearbox after it has been mounted. This asynchronous motor transport is done to any worldwide location.