2AD100C-B05OB1-AS13-A2N2

Product Description

2AD100C-B05OB1-AS13-A2N2 is an advanced servo motor. Its manufacturer is Bosch Rexroth. The product line to which the motor belongs is 2AD. These motors provide a broad speed range, and a broad speed range under field control of 1:6. An optional feature of 2AD motors is a holding brake. The output shaft can be clamped into position at standstill using the holding brake. This means that the main spindle is held in place within the machine. Versions with either electrical clamp or electrical release capabilities are available. The 2AD100C-B05OB1-AS13-A2N2 motor is equipped with an electrically-engaged holding brake, which holds the shaft after application of a 24 Volts DC signal. The brake’s current consumption is 0.9 Amps. Both the release time and clamping time for the brake are 50 milliseconds.

The 2AD100C-B05OB1-AS13-A2N2 motor has a plain shaft without a seal. Operators can order 2AD motors with shafts equipped with a seal. The shaft without seal belongs to IP40 protection class and the shaft with seal belongs to IP65 protection class. The motor is also equipped with a IP54 rated axial blower. Voltage rating of the blower is 230 Volts AC. The blower connection is IP65 rated. The 2AD100C-B05OB1-AS13-A2N2 motor supports high-performance motor feedback. Protection rating of the feedback connection is IP65. The motor has a flange that operators can use for secure mounting. The power plug is on the top side of the motor towards side B of the servo motor housing. Bearings on the motor belong to the standard category. The motor is rated for vibration severity grade 2 and can sustain higher level of vibration. Trained and experienced personnel with proper training should participate in motor operation.