Product Description
The 2AD100C-B05OB1-AS00/S001 asynchronous motor provided by Bosch Rexroth has no integrated holding brake. This motor feedback signals the position of the related rotor to the drive. The product houses the power terminal connection on its top. This device permits installation at a maximum 5000m elevation with derated performance. The unit features a nominal speed of 1500min-1 and a maximum speed of 9000min-1. It is not affected by the spraying of a jet of water. This motor comprises a blower with IP 54 degree of protection. The product cannot have any liquid accumulation surrounding its output keyway shaft. This device encompasses its power connector over the B side.
The motor encounters frictional heat and wear at the lip of its seal. This unit depicts the incorporation of only very low axial loads. Its air stream is generated by a blowing action. Product storage is possible only in a dry place free of both dust and shock. This device mounting, installation and operation are to be done by only qualified personnel. The unit is intended for mounting in a machine that is used only for commercial applications. Its load factors have to be multiplied when both the ambient operating temperature and installation altitude are exceeded. This motor comes with a backup support period of one year.
The product-associated machine cannot be started if it does not meet the EU 89/392/EWG guidelines. This device has a nominal current rating of 17A and a nominal voltage rating of 168V. The unit has Class F insulation in accordance with DIN VDE 0530, Section 1 specifications. It cannot be mounted with accessories and components that do not have the approval of the manufacturer. This motor housing temperature can become very high if its parameters have been changed. The product has no support for any structural changes. This motor is sent in rugged packaging to avoid transit-related damages.
Wake Industrial Warranty
