Product Description
The 2AD100C-B05OA2-AS03-B2N1 asynchronous motor comprises an axial blower fitting to assist in the cooling action. This Bosch Rexroth motor is associated with high-resolution feedback. The product installation is meant to be done only on a dry and clean surface. This device has IP 54 degree of protection for the attached blower. The unit comprises a rotor balanced with the entire key. Its lubricant in the bearings lasts for a longer time than the mechanical service life of the bearings if they encounter a normal load. The motor might have a limited working life because of the increased lubricant consumption. This product features dynamic balancing as per balance class R according to DIN ISO 2373 specifications.
The device encounters an air stream over its surface through air baffles. This unit features a power connection with the thermistor connection, blower connection and feedback connection as its electrical connections. It is not possible to change the position of the power terminal. The motor deploys its feedback for use with a drive controller of the DDS02.2 series. This product portrays absolute accuracy of +/-0.02° for its feedback. The device has no need for a separate incremental encoder connection on the housing. This asynchronous motor encompasses a warranty duration of one year.
The product uses a dedicated protective circuit for the blower connection. The device-associated blower and drive controller work independently of each other. This unit might require the inclusion of an air channel for its cooler to conduct clean air if the operation takes place in a very dirty environment. Its feedback helps in relative indirect position detection. The motor has no negative influence on the environment at any point in time. This product portrays an overall length of 613mm. The device deploys a suction-type blowing action for the air through the connected blower. This asynchronous motor shipment is done by reputed freight carriers.
Wake Industrial Warranty
