Product Description
The 2AD100B-B05OB1-AS03/S001 asynchronous motor manufactured by Bosch Rexroth has a squirrel cage rotor. This motor is used in conjunction with a DIAX or an ECODRIVE series drive controller. The product supports the extension of its shaft for mounting an additional position encoder on its B side. This device cannot be operated at temperatures higher than 55°C. The unit is available in the B05 version for flange mounting. It is necessary to take steps to prevent contamination with vertical installation as a result of liquid penetration along the output shaft when the motor is being attached to the mounting flange. This motor is meant to be used only in a manner defined as appropriate by the manufacturer.
The product is capable of executing the application-specific functions only if the associated drive controller has been programmed before the startup. This device tends to have a very high surface temperature during and immediately after the operation period. The unit may cause the drive controller to move dangerously at any time during operation because of its faulty control. It is cooled by an axial blower with airflow from the B side to the A side. This motor-associated interconnecting part helps to equalize the state of balance of the rotor. The asynchronous portrays one-year backup support.
This product has a reduced lifetime for its bearings if they are associated with non-conforming loads. The device comprises a power terminal in the form of a power connector or a terminal box. This unit portrays NTC thermistor integration in its power terminals. Its high-resolution feedback has an absolute accuracy of +/-0.02°. The motor air circulation must be checked at regular intervals. This product is never meant to be assembled or disassembled in a pressurized state. The motor connection has to be established as per the installation circuit diagram of the manufacturer. This asynchronous motor can be delivered worldwide.
Wake Industrial Warranty
