1MS310F-6B-A1/S010

Product Description

The Bosch 1MS310F-6B-A1/S010 is a stator. The electrical connection is through a cable that is connected to the stator end with larger output diameter. The stator is one component of 1MB motors. The 1MS310F-6B-A1 is specially designed for 1MB motors with the following specifications: motor frame size 310, motor frame length F and motor winding code 6B. Motors that use the 1MS310F-6B-A1 stator have 900 RPM rated speed, 3600 RPM maximum speed, 480 Nm rated torque, 111 Amps rated current, 35 kilowatts rated power output and 246.7 maximum voltage. The recommended minimum cross section of the power connector is 35 mm². The winding resistance is 0.12 Ohms and the winding inductivity is 1.45 millihenry. Weight of the 1MS310F-6B-A1 stator is approximately 133 kilograms. The stator and motors that use the stator can be operated at 0 to 40 degrees Celsius ambient temperature. The stator and motors that use the stator can be stored at -20 to 80 degrees Celsius ambient temperature.

1MB motors that use the 1MS310F-6B-A1/S010 stator have IP00 protection rating. 1MB motors use liquid cooling. The motor stator design includes an aluminum cooling jacket. Rated power loss for motors that use the 1MS310F-6B-A1 stator is 5.5 kilowatts. The coolant temperature at the inlet should be between 10 and 40 degrees Celsius. The required flow rate for the coolant is 7.9 liters per minute. Stators for 1MB motors must be kept in the vertical position prior to mounting. Suitable parallel chains or ropes can be used to lift the stator. This helps to prevent stator bending and ensures that the mounting fit on the cooling jacket is protected. Stator storage in the horizontal position can damage the fit on the cooling jacket which would render the stator unusable.