1MS200H-4D-A2

Product Description

Bosch offers a broad range of energy-efficient and rapid-response frameless synchronous main spindle motors, brake resistors, and drive converters to their clients.

The 1MS200H-4D-A2 model is developed to be used as a direct drive in the motor spindle. The model is a stator of the asynchronous frameless kit spindle motor and is used inconjunction with the rotor designed for the same family. The 1MS stator has a 4D winding code that generates the winding resistance of 0.296 Ohms and the winding inductivity of the motor is 2.87 mH. The stator has 2 pole pairs that contribute to generating the rated torque of 124 Nm in the attached rotor. During continuous operations, the stator consumes 52.6 A of rated current to deliver 19.5 kW of rated power through the output shaft. A 1.5 meters long power cable with a smaller exterior diameter is used by this stator to take input power from a 320 V power source.  The 1MS stator has the ability to rotate the rotor at the maximum speed of 6000 rpm. The maximum allowable environmental temperature range for this stator is +40 degree Celsius. It must be used under the prescribed mounting altitude along with the accessories approved by the company.

The model 1MS200H-4D-A2 uses coolant via an aluminum cooling jacket to maintain its ambient temperature and temperature monitoring sensors are also placed in the motor winding. Due to its low protection category (IP00), the motor is recommended to be used with suitable covers and seals. The model comes with a main spindle position encoder for controlling the exact position of the rotor. This component is extensively used in special purpose machines. Order this stator (1MS200H-4D-A2) from Wake Industrial and receive it along with a warranty package.