1MS160N-4C-A2/S010

Product Description

The 1MS160N-4C-A2/S010 is a stator for Bosch Rexroth 1MB motors that have 160 frame size, frame length of N and winding code 4C. The stator includes an aluminum cooling jacket. The electrical connection is through a 1.5 meter cable that is attached to the stator end with smaller output diameter. The stator includes NTC and PTC thermistors for integration with foreign drive controllers. 1MB motors with 160 frame size and frame length of N have a rated speed of 1500 RPM, maximum speed of 6000 RPM, rated power of 14 kilowatts, rated current at 26 Amps and nominal voltage at 464 Volts. The motor protection class is IP00. The motor insulation class is F. The operating temperature range is 0 to 40 degrees Celsius and the motor storage range is -20 to 80 degrees Celsius.

The weight of the 1MS160N-4C-A2/S010 stator is approximately 28.1 kilograms. The stator is usually supplied as part of a fully configured 1MB motor that includes both the stator and the rotor. Storage and transport of the stator is only permitted while it is in the vertical position. This helps to prevent damage to the aluminum cooling jacket. Ring screws according to DIN 580 are suitable for stator transport. The stator must be protected from dust and vibration during storage and transportation. A type plate is attached to the stator and helps with identification. The information listed on the type plate includes type designation, serial number and month/year of manufacture. The motor surfaces can get very hot during operation. Therefore sufficient time must be provided for the motor to cool down before any maintenance work is performed on the stator or any other motor component. This unit can be shipped globally with a one-year warranty period from Wake Industrial.