1MS160F-4A-A2

Product Description

The Bosch Rexroth 1MS160F-4A-A2 is a stator. It is one of the two main components of 1MB motors with frame size of 160, frame length of F and winding code 4A. 1MB motors are liquid cooled. The 1MS160F-4A-A2 is fitted with an aluminum cooling jacket. The weight of the stator is approximately 15.8 kilograms. The allowed ambient temperature range for motor operation is 0 to 40 degrees Celsius. The allowed range for motor storage and transport is -20 to 80 degrees Celsius. The environment used for storage must be dry and free of vibrations. The stators for 1MB motors should only be lifted and transported in the vertical position. Bosch recommends use of parallel ropes or chains with transport rings for lifting stators such as the 1MS160F-4A-A2.

The vertical position helps to ensure that the stator does not bend and prevents damage to the fit on the cooling jacket. If the fit on the jacket were to be damaged, the stator would be rendered unusable. The 1MS160F-4A-A2 stator only receives its rigidity after it is installed on the spindle housing. The stator can be identified by a type plate that is attached to the thick end of the device on the inside of the cooling jacket. This type plate includes the type designation of the stator, the serial number and the month/year of manufacture. The electrical connection on the 1MS160F-4A-A2 is via a cable that is connected to the stator side with smaller output diameter. The 1MS160F-4A-A2 should be handled and installed by trained personnel. All relevant installation and safety instructions are detailed in the product documentation, and should be followed for ensuring proper operation. This unit can be shipped globally with a one-year warranty period from Wake Industrial.