Product Description

AM3063-1N40-0000 is a motor optimized for industrial applications. The motor is a product of Beckhoff Automation, a German company specializing in automation technology and control systems. It is part of the AM3000 series of synchronous motors. These motors must be deployed with a Beckhoff servo drive. In addition to providing AC power for the motor, the drive controls its speed and shaft position. AM3000 motors feature a brushless design with reliable and safe electronic commutation. High-quality permanent magnets used for the rotor enable construction of motors with low rotor inertia. Integrated temperature monitoring prevents equipment damage that can occur due to overheating or overload conditions. The motor housing is made of high-quality aluminum and complies with IP54 requirements. This rating indicates robust protection against solid and liquid ingress.

These motors dissipate heat via convection cooling. This cooling method provides cost-effective cooling without the need for expensive cooling fans or other methods. The AM3063-1N40-0000 shaft includes a groove and feather key. Other shaft designs are available for different application requirements. An integrated multi turn encoder with high-speed BISS interface provides accurate feedback to the servo drive. Holding brakes are supported by AM3000 motors. However, the AM3063-1N40-0000 motor does not feature a brake. These brakes can’t be retrofitted. The motor has a flange for mounting. Size of the flange on the motor is 138 millimeters. The peak input voltage is 480 Volts AC. The specified motor values at 400 Volts AC include 17 Nm standstill torque, 9.6 Nm rated torque, 59.8 Nm peak torque, 5000 RPM rated speed, 5.03 kilowatts rated power, 17.4 Amps standstill current, and 87 Amps peak current. An M23 industrial connector provides a reliable connection with the drive.