Product Description

The AM3044-0G40-0000 servo motor from Beckhoff's AM Servo Motor Series is a high-performance device designed for demanding motion control applications. With a nominal voltage of 480 V AC, it delivers a peak torque of 23.7 Nm and a standstill torque of 5.88 Nm. These torque values represent the motor's ability to generate rotational force, with peak torque being the maximum achievable and standstill torque indicating the force available at zero speed. The motor's rated power of 1.57 kW specifies the rate at which it can perform work, influencing its acceleration and load-carrying capacity. The AM3044-0G40-0000 is a synchronous servomotor, meaning its rotor's rotation is synchronized with the frequency of the supplied current. This synchronization ensures precise control over the motor's speed and position.

The motor features convection cooling, relying on the natural airflow to dissipate heat generated during operation. This cooling method suits applications where the motor is not enclosed or subjected to extreme temperature conditions. The motor's peak current of 25.0 A and standstill current of 5.00 A reflect the electrical demands during maximum torque output and standstill conditions, respectively. The torque constant of 1.19 Nm/A indicates the relationship between the motor's torque output and the applied current. A higher torque constant signifies greater efficiency in converting electrical energy into mechanical force.

With a rotor moment of inertia of 2.730 kgcm², the AM3044-0G40-0000 exhibits a specific resistance to changes in rotational motion. This inertia, combined with the motor's torque capabilities, determines its dynamic response, affecting acceleration and deceleration rates. The motor supports various feedback mechanisms, including a resolver, BiSS B, and EnDat 2.1, enabling precise monitoring of its position and speed for accurate control. The AM3044-0G40-0000 is designed to operate within an ambient temperature range of +5°C to +40°C. Operating the motor beyond this range may affect its performance and longevity. The motor's connection method, M23, specifies the type of connector used for electrical and signal interfaces, ensuring compatibility with corresponding drive systems. The AM3044-0G40-0000 holds CE, cURus, and EAC certifications, signifying compliance with relevant safety and performance standards.