Product Description

X20PS3300 is a power supply module. It is compatible with X20 systems from B & R Automation. The module supplies 24 Volts DC for I/O and bus. Three LED indicators provide status diagnostics for the module's status, its operating status, and overload conditions. Software can also be used to access module run/error diagnostics and overload diagnostics. The power consumption for the X2X link supply is 1.42 watts. Internal I/O installed on the module draws 0.6 Watts. The X20PS3300 module requires 24 Volts DC input voltage. The allowed input voltage tolerance is -15% and +20%. The input current can reach maximum 0.7 Amps. The integrated fuse on the X20PS3300 cannot be replaced. The module supports reverse polarity protection. The nominal output power for the X2X link supply is 7 Watts.

Parallel connections are supported. The module supports redundant operation. Overload characteristics include temporary overload and short-circuit protection. Input voltage for the I/O power supply is 24 Volts DC with -15%/+20% tolerance. A line fuse is required: its maximum rating can be 10 Amps and the fuse should belong to the slow-blow category. Nominal output of the module is 24 Volts DC. A fuse is required on the output side. The contact load can go up to 10 Amps. The X2X link supply is isolated from the X2X link supply. The I/O supply is not isolated. B &R permits module mounting in the vertical and horizontal orientations. For every additional 100-meter altitude beyond 2000 meters, a 0.5 degrees Celsius ambient temperature reduction is mandated. Ingres Protection (IP) rating of the power supply is IP20. One bus module and a terminal block are required accessories and require separate ordering.