X20PS2110

Product Description

X20PS2110 is a X20 series power supply module. It is a B & R Automation prodcut. The module supplies 24 Volts DC. It only supplies power for the internal I/O. An integrated fuse is installed on the module. If it becomes defective, this fuse can be replaced. Module diagnostics are available via two status LEDs and software. The LEDs provide status information about the supply module and its operating state. The supply module bus power consumption is 0.2 Watts. Internal I/O o the module consume 0.82 Watts. The module is certified by multiple organizations, including ATEX, UL, HazLoc, CE and UKCA. The input voltage is 24 volts DC. The maximum input current is 6 Amps. The module does not support reverse polarity protection.

The nominal output voltage 24 Volts DC. An integrated fuse provides short-circuit protection. The permissible contact load is 6 Amps. The module can be installed in the vertical or horizontal orientations. With IP20 protection rating, it is suitable for indoor use and, when mounted inside a cabinet, for outdoor use. The power supply has a humidity range for operation, storage and transport of 5% to 95%. The operating temperature is -25 to 50 degrees when the module in installed in the vertical orientation and -25 to 60 degrees when installed horizontally. One terminal block (X20TB12) and one bus module (X20BM01) must be ordered separately. Operators can replace the built-in 6.3 Amps fuse if it becomes defective. To replace a faulty fuse, operators must remove the fuse cover, which must be done with the fuse on the right side. A new fuse can be pushed in after removing the defective fuse.