Product Description

X20PD0011 is a potential distributor module. It can provide 12x ground to the terminal connections. The module provides the ground from the internal I/O supply. Use of the module enables wiring possibilities for sensors and actuators. A replaceable microfuse is available on the module. This fuse is between the X20 I/O supply and the GND potential on the terminal block. The X20 PLC can monitor the function of this fuse. The wired load used with the X20PD0011 module must be supplied with DC power at 24 Volts. The module is compatible with the X20TB12 terminal block that features 12 pins and operates at 24 Volts DC. LED status indicators provide operation state and module status indications. The bus power consumption is 0.12 Watts. Power consumption of the internal I/O is 1 Watt.

Current rating of the internal fuse is 6.3 Amps. This slow-blow fuse is filed replaceable. The permitted contact load is 10 Amps. Operators can mount the X20PD0011 module horizontally and vertically. With IP20 protection rating, the module can be used indoors. For outdoor use, a suitable industrial enclosure with robust ingress protection must be used. The operating temperature range recommended, when installed vertically, is -25 to 50 degrees Celsius. The operating temperature recommended, when installed horizontally, is -25 to 60 degrees Celsius. The temperature range recommended by the manufacturer for module storage or transport is -40 to 85 degrees Celsius. To replace the fuse, operators must remove the fuse cover with a suitable screwdriver, slide out the faulty fuse from the fuse holder and install a new fuse. The module occupies one digital slot in CAN I/O. Only professionally trained and qualified personnel should handle the module.