Product Description

Identified by the enclosed cross-sectional 4x 1.5 mm2 + 2x 2x 0.75 mm2 configuration marking as 8CM015.12-1, the motor cable is designed for applications that require a very high performance. This cable has the 8-pin Intercontec female motor connector and is designed for over fifty connection cycles thus ensuring reliable and secure connections. To facilitate various deployment in multiple systems, the connection is provided with four power connectors and four signal contacts.

The 8CM015.12-1 cable is rated for operation voltage not less than one thousand volts, In addition endurance test with 1500VAC is done for wire to wire and wire to shield configurations ensuring very good insulation properties. The insulation resistance greater than 13.33Gohm shows high level of reliability and durable even in very severe environments. Conductor resistance of power cables is limited to 0.21 while that of signal cables does not exceed 0.29. This makes it unnecessary to compromise in either energy delivery or signalling. Thus, the cable can be suitably used in multiple mounting configurations as maximum current 20 A when fixed on the wall 17.8A when installed in a conduit or cable duct and 20.9 A when installed in cable trays.

The 8CM015.12-1 cable is engineered to withstand temperature variations between -10 and 70 degrees Celsius, thus making it useful for use in both static and dynamic applications. The standard of protection it achieves while being attached is IP67 which means that the product is highly resistant to dust and water ingress which makes it suitable for the rigorous conditions expected of industrial use (EN 60529).