Preparing your secure checkout page...
Warranty
Wake Industrial Warranty
To Speak to a sales representative for pricing and lead time:
Product Description
Designed for 10m length use, the motor cable, model number 8CM010.12-1, is expected to work reliably and efficiently in rugged industrial environments. This type of cable is adequate for the chassis design of systems with two signal senders with dimensions of 2 x 0.75 square millimeters and four power lines contained within that of 1.5 square millimeter hoses, hence effective distribution of power and signal structure is required.
It is nicely insulated and shielded, the cable is rated for use at 1000 V and is not supposed to be used above these volts. Safety engineering for connections either wire to wire or wires to shields relies on a test voltage of 1500 VAC. The 8CM010.12-1 power cables have an electrical resistance of 0.14 while the signal wires have an electrical resistance of 0.19; this is a means of ensuring high efficiency of usage and hence minimal wastage of energy. Placed in a hostile environment the insulating material provides an insulating resistance of more than 20 G ensuring effective protection against the risk of electric leakage.
The CSA AWM I/II A/B, 90 degrees C, 1000 V, FT2 LL46064 about this cable has a CSA approval which speaks for the quality and safety compliance of this cable. Because of its characteristics operation within a range (-10 degrees - 70 degrees ) during transit and in a stationary position (-20 degrees -90 degrees ) reveals that it is versatile and can work in various environmental conditions. The ingress protection rating for this was high and therefore making it improbable for any water or dust to penetrate when under connected conditions IP67 rated. The 8CM010.12-1 cable can be operated in a bend radii Angle of >40 mm for single bends on installation thus providing the management routing in different z configurations. There is an 8-pin female Intercontec connector that ensures the connections are safe and reliable. The motor cable is generally robust and dependable suitable for a range of industrial settings making it very suitable for dynamic and stationary applications.
