Product Description

The developed 7 meters Motor cable 8CM007.12-1 is suitable for the industrial environment. The cable has a rigid construction and has been designed with cross sections of the conductors as power lines of 4 x 1.5mm^2, signal lines of 2 x 2 x 0.75mm^2, ensuring that it serves its purpose well in transmission of both power and signals. The 8CM007.12-1 is constructed to withstand considerable strain with a maximum working voltage of 1000 V and a test voltage of 1500 VAC between the wires and shields. The cable depicts a satisfactory conductance portrayed by the conductor resistance of: <= 0.1 ohm for the power lines and <= 0.13 ohm for the signal lines. The 8CM007.12-1 cable also exhibits very high dielectric strength with Insulation resistance exceeding > 28.57 G, hence very efficient in preventing excessive currents.

The most important property of this cable is its mechanical toughness as cited in VDE 0472 part 803 it is grease resistant which enables its application in harsh mechanical environments. Screwed to the end of the cable is an Intercontec 8 pin female motor connector designed for plug and unplug more than 50 cycles. The attachment also provides high level protection with the IP67 certification in accordance with the provisions of EN 60529. The temperature range with respect to moving temperature of fixed heating elements -10 degrees c degrees CE" 70 degrees C and stationary temperate of -20 degrees CE" 90 degrees is quite favourable for wide use. The following are the mechanical specifications: O.D. is 12.8 mm ~0.4 mm, the moving bend radius is not less than 99 mm and the single bend radius is greater than 40 mm.

This drag chain compatible device, >=3,000,000 cycle flexibility, <60 m/s^2 acceleration and <4 m/s velocity, though efficient in motion provides productive and quality service even in extreme conditions application. This cable is indeed a good option for industrial systems that guarantee high performance.