Product Description

The industrial application, in which the 8CM005.12-5 motor cable of 5 meters length is going to be used is a high-demand one among industries. This cable is able to sufficiently address such high power and signal transport needs due to its cross-section structure of 4x 10 mm2 and 2x 2x 1.5 mm. The maximum working voltage rating of the cable is up to 1000 V therefore it can be applied in environments where the cables are likely to be subjected to high voltages. The outer sheath, which is made of PUR material is bright orange colour which is similar to the RAL 2003 flat. This particular sheath not only ensures visibility, but also strength.

In the case of this 8CM005.12-5 cable, the power wires are black, brown, blue and yellow/green, while the signal wires are white, white/red, white/blue and white/green, which is due to the strength of the cable. It is made such that there is ease in making the wires connections and also the power wires identification is not hard. Electrical penetration is also increased as this wire sheath has a resistance to insulation greater than 40 Gohm which means that there is greater safety from electrical current leakage and enhances service.

For this cable as it is installed in the cable trays, the maximum current that it can carry is 68.3 A, 54.6 A when it is installed in conduit/cable ducts, and 64.6 A when fixed on walls. The 8CM005.12-5 also measures 20.1 mm in diameter with a deviation of ~0.7 mm and weighs 4.29 kg all of which are indicators of the ruggedized and quality materials it is made of.