Product Description

The 8AC141.61-3 ACOPOS a two-row plugin is one of the long overdue highly sophisticated modules developed for the execution of automation hard techniques. This module boasts of a maximum power rating of 4.5 W when in use, thus highlighting the aspect of good energy use with effective output. Here, Hot slots 1 and 2 refer to the two hot slots that are replaceable and the AC140 operating system version 2.80 and above is installed on this module. Furthermore, this module is used with a wide range of platforms mainly for industrial purposes as well. However, a module can be significantly more powerful as long as its clock speed is 100 MHz, it has 32 MB RAM or DDR, and 32 kB SRAM.

Just as the 8AC141.61-3 has a female RJ45 Jack for internet connection, it has a plethora of stuffing options including as well as two CAN ports and an RS232 port both connected to a nine pin male DSUB connector. This enhances exchange of information as well as the ability to interface with other communication systems. On aspects of input/output (I/O) functionality, this 8AC141.61-3 module has got three digital I/O channels whose nature can be according to requirement set to be either input or output. The voltage rating for these channels is 24 VDC and current at 500mA whereas there is also one analogue input with the extent of ~10V. In brief, this module can perform both measurement and control processes.

As for storage requirements, this module's operational temperature is 5 to 40 Degrees Celsius, the high temperature of 5 degrees is choused, the high humidity of fifty five degrees and the low -25 degrees Celsius are observed during operation. As high as 5 and low as 95% relative humidity values are notched in storage in operation envelope and as a result the module passes a test in many fields of industry.