Product Description

The 5PP120.1043-37A is a power panel designed by B & R Automation with a Basic Input and Output System. The panel is a touchscreen device without any keys. It is also equipped with a reliable Geode SC 2200 processor that functions at a frequency of 266 Megahertz and a 32-bit process width. Despite the extreme sophistication of this power panel, it is very easy to install and operate. The power panel also provides an impressive visualization interface through its Color Thin Film Transistor that can show up to 262,144 colors. The flash memory on this product is measured to be about 2 megabytes, the firmware used by the panel is stored on this memory. There is also a DRAM unit with a storage capacity of 128 megabytes and an SO-DIMM 144-pin interface.

The 5PP120.1043-37A power panel is equipped with an Ethernet Interface controlled by a MacPhyter DP83816 controller. The transfer rate at the Ethernet interface is about 10/100 megabytes per second. There are other connection interfaces on this product, including the power supply interface, the Serial COM interface, and the USB interface. In case of machine failure, there is a reset button behind the power panel that can be used to initiate a reset mode in the product.

The 5PP120.1043-37A power panel operates with a rated voltage of 24 volts, and a power consumption of about 15 watts. The bleeder resistor in the product is less than 24 ohms. A real-time clock is present in the housing of this product; the clock helps the processor to handle time-sensitive operations, it is backed by a lithium battery, and maintains an accuracy of 10 parts per million during operation.