Product Description

The 5C2001. 7 Controller is part of B&R Automation Manufacturing's 5C2 series and is a very specific device that contains a 486DX5-133 processor and a coprocessor. It has a real-time clock and an Award Elite BIOS to provide dependable service and time display.

The device has 32MB of DRAM, which is installed in one PS/2 SIMM slot, and the Graphic Controller is C&T 65550 with 1MB of graphic memory. It also comprises 256kB of battery-backed SRAM to improve the retention of data. Though it has no internal Silicon Disk ATA/TrueIDE it has an external compact flash with TrueIDE. The communication interface is fully equipped with COM1 which supports RS 232, COM2 which supports RS 232/TTY, and COM3 and COM4 which are isolated and support RS 485/TTY and RS 232/422 respectively. The controller also consists of a bi-directional LPT1 port, an isolated CAN bus located on the COM3 plug, and the Ethernet connector that supports the BNC and NE2000 standards. It has no Arcnet connection but it has two Type II or one Type

PC-Card slots for better expansion. It has a 40mm ball-bearing fan, PS/2 AT keyboard connector, flat display connection and monitor connection. It also supports a Panel ware keypad module, an external disk drive interface, as well as a Dallas hardware security key, therefore, enhancing security.

The dimensions of the device are 182 x 182 x 50 mm while the weight of the device is about 1. 7 kg, and should be mounted vertically within a ~45 degrees angle. It runs effectively at an altitude of up to 3,000 meters and temperatures ranging from 5-50 degrees C depending on usage frequency. Mass memory is defined as being able to begin with a 2. 1 GB hard disk from revision F0 onwards, which means the 5C2001. 7 a dependable and universal regulator for numerous uses. The product is available at Wake Industrial with a one-year warranty period.